roosterk0031
Full Access Member
Got my daughter a 2010 LT auto last spring. 2 weeks ago while at college it wouldn't crank, she tried to jump it with a portable from dorms (had 1 or 2 other times this fall, I assumed she left something on) wouldn't work this time. Afterwards the driving lights started flashing and never stop till battery went dead. Next day I was going there for something else and took my 09 xfe battery along. Swapped battery started right up and she got home fine.
Installed new battery few days later. 7 days later on Thanksgiving while driving all gauges and electrical quit, car kept running. Short time later they came back on. That night she stopped to visit my mom, sometime that evening the lights started flashing and won't crank and it's still sitting there.
I put in a old battery to let it drain it overnight thinking that would reset it. No luck connect battery or 50 amp fuse and light start flashing and no crank. Also means can't get it out of gear either so I could drag it home.
Car was in front end accident (salvage title) 33,000 miles, fuse box is a little loose not sure if that could make any difference.
I went thru the key relearn thing thinking it is security issue. First time some clicking noise from front of engine and fuse box area, lasted about 15 seconds then nothing. Follow up attempts nothing.
Any tips, did get Haynes manual over weekend but haven't dug into it yet.
---------- Post added at 05:37 PM ---------- Previous post was at 05:32 PM ----------
I did already get another fuse box as I'm sure if I end up having to take it to a dealer they are going to tell me it needs replaced.
Installed new battery few days later. 7 days later on Thanksgiving while driving all gauges and electrical quit, car kept running. Short time later they came back on. That night she stopped to visit my mom, sometime that evening the lights started flashing and won't crank and it's still sitting there.
I put in a old battery to let it drain it overnight thinking that would reset it. No luck connect battery or 50 amp fuse and light start flashing and no crank. Also means can't get it out of gear either so I could drag it home.
Car was in front end accident (salvage title) 33,000 miles, fuse box is a little loose not sure if that could make any difference.
I went thru the key relearn thing thinking it is security issue. First time some clicking noise from front of engine and fuse box area, lasted about 15 seconds then nothing. Follow up attempts nothing.
Any tips, did get Haynes manual over weekend but haven't dug into it yet.
---------- Post added at 05:37 PM ---------- Previous post was at 05:32 PM ----------
I did already get another fuse box as I'm sure if I end up having to take it to a dealer they are going to tell me it needs replaced.