Wheel Spacers

[cobalt123]

oh..yeah i guess the trottle body

 

[ff_drift_lol]

not crap just not exactly recommended as they can cause unwanted results

they wear the hubs a litle bit. cars break dude so what. at least its not nitrous, youre not talking about the block here its a 200 dollar hub. sucks but whatever you gotta pay to play. not trying to be a dick but deal with it you guys are such wimps when it comes to pursuing something different. sometimes you gotta sacrifice shit to get what you want, and 5, 10mm spacers arent even going to do that. its when you get to 20, 25 with -3 degrees camber from stock that you have to worry about that shit.

 

[ls1fbody]

If you're SC'ing you car, don't bother with the stock H/E. Just run a big front mount like OTTP's. You'll have cooler IAT's that way.

 

[ff_drift_lol]

nice, im not gonna bother porting the m62, stenguyen was disappointed with his so im not

ported mine, stop listening to idiots. if you do it right and not chop up your shit itll work. these people are fucking idiots remember that.

 

[ls1fbody]

they wear the hubs a litle bit. cars break dude so what. at least its not nitrous, youre not talking about the block here its a 200 dollar hub. sucks but whatever you gotta pay to play. not trying to be a dick but deal with it you guys are such wimps when it comes to pursuing something different. sometimes you gotta sacrifice shit to get what you want, and 5, 10mm spacers arent even going to do that. its when you get to 20, 25 with -3 degrees camber from stock that you have to worry about that shit.

my rear end has -2.9* of camber.... Why you be hatin?

But i do agree, if you're going to mod, be prepared to pay. Repair bills really suck, but at least you know the limits now.

 

[ff_drift_lol]

If you're SC'ing you car, don't bother with the stock H/E. Just run a big front mount like OTTP's. You'll have cooler IAT's that way.

word

---------- Post added at 02:23 AM ---------- Previous post was at 02:19 AM ----------

imn sorry, -3 is not a lot at all. i am talking about -10 or so. people read shit about camber bunnies on nico forums and go bitching about it in much less extreme situations claiming itll do the same shit. even the guys with massive camber rarely have these problems. gah im fucking wasted, stop being wimps.

 

[ls1fbody]

hahah, nice mike. the 2.9 isn't practical, i'm just playing with you. I need to have some shims put in the rear to bring it to -1 on both sides. Got my camber bolts for the front, so i can get rid of this crazy positive BS.

 

[ff_drift_lol]

get em from spc? i have them, on the machine theyre not so effective. ive adjusted them they claim to be +/- 1 degree i have seen .4 at the most. its a hunter machine with the crazy reflector shit i forget the name for it, but its legit as ****. anyway, just make sure youre on an alignment machine when you install those

 

[cobalt123]

im just saying that those 2.2s that have ported theirs was disappointed in the gains not that there wasnt any...not worth it

 

[ff_drift_lol]

gotta keep in mind the head is not the same on the 2.2

BUT, they could also SUCK at what theyre doing. i just shaved everything and smoothed it out. worked like a charm.