Turbo 2.2 using other factory kits

[CobaltCpe]

yeah i would really like to do the saab setup too as $1500 is not too bad.

 

[RJSLSECOTEC]

i think if u search hard enough and have the resources it might be able to be done under a grand.. well thats what im shootin for..haha.
does anyone know what the stock spring is set at on the saab high pressure turbo? like 7psi?? maybe?

 

[06ion2coup]

i think if u search hard enough and have the resources it might be able to be done under a grand.. well thats what im shootin for..haha.
does anyone know what the stock spring is set at on the saab high pressure turbo? like 7psi?? maybe?

under a grand...? are you taking into account the tune, custum DP, Wideband, injectors, pillar pod, there is NO way you can boost a car for under one grand... a decent boost setup will take about 3grand to be running on the car...

 

[ff_drift_lol]

cool man this makes everything look much easier.

 

[ßlåçk§mókè]

under a grand...? are you taking into account the tune, custum DP, Wideband, injectors, pillar pod, there is NO way you can boost a car for under one grand... a decent boost setup will take about 3grand to be running on the car...

Not sure about that.... but I boosted a old 92 sunbird 3.1 L for 750$'s
Using all junk yard parts

But if your talking a good strong reliable kit... your looking at 1500 - 2200
Counts what you got for parts already and know the right people

 

[06ion2coup]

Not sure about that.... but I boosted a old 92 sunbird 3.1 L for 750$'s
Using all junk yard parts

But if your talking a good strong reliable kit... your looking at 1500 - 2200
Counts what you got for parts already and know the right people

... what kind of gains are you expecting... if im boosting a 2.2 im hoping to go from the 125ish whp to 210 with the power to make over 300

 

[TurboTechRacing]

Nice write up!

 

[BlackCobalt707]

you know you can draw oil from the head as well right? its alot easier then doin it from the block

 

[interviewatruins]

you know you can draw oil from the head as well right? its alot easier then doin it from the block

theres a reason you don't want to draw oil from the head.
there is a restrictor up there.
to be honest the best place to draw oil from is directly from the pan.

---------- Post added at 12:29 PM ---------- Previous post was at 12:25 PM ----------

under a grand...? are you taking into account the tune, custum DP, Wideband, injectors, pillar pod, there is NO way you can boost a car for under one grand... a decent boost setup will take about 3grand to be running on the car...

downpipe = 80 bucks tops, for me 40.
injectors = 150 used with harness.
i bought 60s for 40 bucks before on ss.net.
pillar pod not really needed = 40 used
wideband = 150 used
tune = 200

plus the turbo parts which is on sale on ss.net for 800 right now.
http://www.css.net/forums/showthread.php?t=193961

seriously includes everything you need.even piping and fmic.
so yes it can be had for less than 3k.

---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------

Have you finished the install?

he did an ls/sc build not turbo.
just giving out info to the site

 

[BlackCobalt707]

seriously???? how do i remove the restrictor?

---------- Post added at 12:35 PM ---------- Previous post was at 12:33 PM ----------

and how would you draw oil from the oil pan? a pump? and when did they start using a restrictor, i got a head off of a cavy not a cobalt on it