Powered By LE5's build thread

[PoweredByLE5]

Well everyone keeps saying I should make one. I guess here it is then. But idk it seems kinda pointless since my car is almost done anyway but whatever.

So here's my mods list currently http://img11.imageshack.us/img11/435/modsm.jpg

Here's pics: http://www.cardomain.com/ride/3022946

Here's me racing but don't laugh it was my first time and i think the wheel hop killed my time I'm not happy with the time I got and I know I deff could of gotten better

http://www.youtube.com/watch?v=iAym-2r2hl8

And here's a video giving a tour of my cobalt: http://www.youtube.com/watch?v=i08cukw8-E0


Here's a list of what I need to complete my car.


Interior:

Black door sills front, middle bottom pillars, and rear sills

Black trunk deck lid interior side

Black carpet

Black seat frames

Recover door inserts blue

Front speakers

Amp(s)

Light up my cobalt door sill plates blue with tape light like on a lexus or mustang



Brakes:

R1concepts slotted rotors

Hawk HPS brake pads


Engine:

OTTP stage 1 rotated trans mount



Updates:

Now have 5 gauges. water temp, oil pressure, volts, boost, and wideband.


VIDEO: http://www.youtube.com/watch?v=jpBmne7bZOY

Update 5/7/10

Got my exhaust on! Magnaflow muffler, and resonator. Here's a pic and teaser vid for now till I get a better vid with my HD camera. If you skip to 30 sec in the vid, I close most of the windows so u don't hear all the wind. And I will get a picture under the car as well. I didn't take one when it was on the lift, cause the picture wouldn't of came out good from my phone since I don't have flash.

Video: http://www.youtube.com/watch?v=hTDbJazIgNk watch in HD!

WOT runs: http://www.youtube.com/watch_private...tWaDXcnsOpA60w

 

[BlackCobalt707]

pics? time slips? dyno numbers? vids?

 

[camopaint0707]

like this should be once you already got the parts shouldn't it?

 

[PoweredByLE5]

pics? time slips? dyno numbers? vids?

posted

like this should be once you already got the parts shouldn't it?

huh?

 

[camopaint0707]

well good then

 

[cobalt123]

no a build thread is used to keep track of a build, like mine, updated as parts become available. it is my hope that any questions that eric has can be resolved in one thread, were he can come back to it later if he forgets something

---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------

but if you want the supercharge parts lists:

First off here is a list of the parts i am collecting

GM Parts

11900248 – LSJ TB To SC Bolts (4)
12575463 – LSJ TB Gasket
12584342 – LSJ Supercharger Gasket
12594387 – LSJ IC Pump Insulator
12597855 – LSJ Intake Manifold Gasket
12597993 – LSJ Stage 2 Serpentine Belt
12614973 – LSJ 1 Bar Map Sensor
15247280 – LSJ Upper Radiator Hose-cobalt addiction chrome URH
9230949 – LSJ Exhaust Manifold Gasket
11516342 – LSJ Intake Manifold Mount To Block Bolts (2)
11589214 – LSJ Supercharger to Intake Manifold Bolts (4)
12345982 – Genuine GM Supercharger Oil (Qty 2) 4 oz ea)
12584369 – LSJ TB To Purge Solenoid Tube
12585150 – LSJ IC Pump Rear Bracket To Intake Manifold Mount
12586367 – LSJ IC Pump Front Bracket To Rear Bracket
12586632 – LSJ Lower Intake Manifold Mount
15226536 – LAP | L61 | L65 Coolant Reservoir
15075118 – LAP | L61 | L65 Coolant Reservoir Cap
15231157 – LSJ Downpipe To Cat Back Gasket
15235773 – LSJ Exhaust Manifold To Downpipe Gasket
15253932 – LSJ Power Brake Booster Vacuum Hose
22729469 – LSJ Windshield Washer Container
22732432 – LSJ Wiper Cowl To Washer Container Hose
88986255 – LSJ 8 Pin TB Connector (LAP | L61 Only 6)
89046833 – IC Pump Connector
90537953 – LSJ Exhaust Manifold Heat Shield
15411879 – 2005 Cavalier Injector Wiring Harness. No cutting needed using GM Stage 2 Injectors

New Parts
ZZP Triple Gauge Pod
OTTP SS SC Pulley Bolts
Aeroforce Interceptor Gauge
GlowShift Vacuum | Boost Gauge
AEM Wideband Air | Fuel Ratio Gauge
OTTP 3.0 Polished Pulley (For Stage 2 Hub)
NGK Copper Spark Plugs (Part# LFR6A-11)


Used Parts
Eaton M62 Supercharger
GM Stage 2 Injectors (42lbs)
Stock LSJ Tensioner
Stock LSJ Downpipe
Stock LSJ Idler Pulley
Stock LSJ Throttle Body
Stock LSJ Serpentine Belt
Stock LSJ Intake Manifold
Stock LSJ Exhaust Manifold
Stock LSJ Alternator Bracket
Stock LSJ Supercharger Pulley
Stock LSJ Heat Exchanger
Stock LSJ Intercooler Pump

how about a intake manifold lower mount???-got it

Standard Bolts Needed (Not GM)

LSJ 1 Bar MAP To Intake Manifold
M6 x 1.0 x 25 (Qty 1)

LSJ Intake Manifold Mount Bracket To Intake Manifold
M10 X 1.50 x 50 (Qty 1)

LSJ Rear IC Pump Bracket To Intake Manifold Mount
M8 X 1.25 X 25 – (Qty 2)

LSJ Front IC Pump Bracket To Rear IC Pump Bracket
M8 X 1.25 X 35 – (Qty 2)

LSJ Idler Pulley To Block
M10 X 1.50 x 75 (Qty 1)

LSJ Idler Pulley To Alternator Bracket
M8 x 1.25 x 25

LSJ Intake Manifold To Block
M6 x 1.0 X 75 (Qty 2)

LSJ Alternator Bracket To Block
M8 X 1.25 X 130 (Qty 3)

LSJ SC Bypass Valve To SC
M8 X 1.25 X 20 (Qty 2)

LSJ Tensioner Lower To Alternator Bracket
M8 x 1.25 x 35

LSJ Tensioner Upper To Alternator Bracket
M8 X 1.25 x 40… not standard bolt though. Has to be metric hex socket bolt.


LSJ SC Reservoir Bracket To SC
M6 x 1.0 x 15 (Qty 2)

LSJ SC Reservoir To SC Reservoir Bracket
M6 x 1.0 x 15 (Qty 2)

 

[PoweredByLE5]

oh no thanks i'm gonna get the zzp supercharge kit

 

[Aikidoshadow]

oh no thanks i'm gonna get the zzp supercharge kit

You sold me a downpipe with a leak in the flexpipe. I poop on your build.

 

[cobalt123]

oh no thanks i'm gonna get the zzp supercharge kit

well keep it there for a reference there are things about the ZZP kit i dont like

1.) you cant pick the parts yourself
2.) doesnt include a tune
3.) overpriced
...

 

[Robinson]

shhh