cobalt123
Platinum Member
get moog endlinks, wont break your pocket book and pretty strong...
need opinions on front stabilizer bar
- Thread starter ff_drift_lol
- Start date
ff_drift_lol
Full Access Member
i do like moog theyve never failed me
cobalt123
Platinum Member
im thinking about just getting some of them even though the ss/tc endlinks are perfectly good
ls1fbody
Full Access Member
- Joined
- Jan 30, 2010
- Posts
- 263
- Reaction score
- 0
Powergrid 
ff_drift_lol
Full Access Member
link?
ls1fbody
Full Access Member
- Joined
- Jan 30, 2010
- Posts
- 263
- Reaction score
- 0
cobalt123
Platinum Member
holy shit 160 bucks
ls1fbody
Full Access Member
- Joined
- Jan 30, 2010
- Posts
- 263
- Reaction score
- 0
Holy shit they're worth it. IMO, especially since mike has a tweaked subframe, there may be a pre-load introduced into his suspension now. With these he can dial it out.
cobalt123
Platinum Member
better not break 
ff_drift_lol
Full Access Member
im certainly not using a tweaked frame. i have another one coming tomorrow. i ordered moog for now.
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
justdid control arm bushings for a friend they were brand new fe5 arms he gave me the un used bushings for putting his sphericals in. since mine are shot this worked out perfectly! stoked. got my UNBENT cradle coming tomorrow. should be much better. i think the strut is bent. so doing both front struts plus the hub is all i have left really. the control arms measured straight. tire is leaking though
---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------
justdid control arm bushings for a friend they were brand new fe5 arms he gave me the un used bushings for putting his sphericals in. since mine are shot this worked out perfectly! stoked. got my UNBENT cradle coming tomorrow. should be much better. i think the strut is bent. so doing both front struts plus the hub is all i have left really. the control arms measured straight. tire is leaking though