Locations for oil and water gauges

[JOHNBOY]

I would like to install aftermarket electric oil pressure and water temp gauges in my 08 ss. Has any one done this is. I would like to keep the factory sensors in place for warranty purposes.

 

[Hailcesar75]

2.4 ss?

---------- Post added at 09:49 PM ---------- Previous post was at 09:49 PM ----------

Oh and welcome.

---------- Post added at 09:55 PM ---------- Previous post was at 09:49 PM ----------

Wait crap didn't see the section.

 

[JOHNBOY]

Hi - no 2.0

 

[Hailcesar75]

Oil pressure u can get under the intake manifold. Just unscrew the stock sensor and move it up to a bolt spot on the drivers side of the engine

---------- Post added at 10:05 PM ---------- Previous post was at 10:00 PM ----------

Water temp you get at the passenger side radiator hose. You gonna have to cut it tho and get a sensor adapter. You can get it from summit racing.

---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------

Unfortunately you probably gonna have to move the factory oil pressure sensor. I did. I used a mechanical gauge tho. It's more accurate

 

[JOHNBOY]

Ok i'll give a try thanks