How can i fit 12" kickers in my car?

[emperorjj1]

everyone has sorta forgot to ask how big is the box. fitting 2 12s in there is easy but your box may be too big to fit.

 

[kawkinurjawl]

I have a 15" Diamond D3.4 in a ported L box. the box dimensions are 40" long 18" deep and 16 3/4" tall. i had 42" to spare wall to wall in my trunk, but i made it fit ;]. the only way to get it in was remove all of the back seat, even the lower seat belt harnesses. im hitting 141db at 52 cycles per second on a JL Audio J2500.1 and a kenwood excelon headunit. not sure the model number on head unit. I will post pictures soon.

 

[Jmesl8er]

So i have 12" kickers..box with them...and theres a slight problem..the cars trunk is too small. Is there a better way at getting these things in there?

2005 chevy cobalt lt [sedan]

here are the subs and box I got

Amazon.com: Kicker 07DC122 Dual Comp 12-Inch 2-Ohm Subwoofers In Vented Box: Electronics

tuck your vag in and try harder

 

[cobalt123]

lol

 

[ZapFrog]

I ran 2x kicker l7's in a kicker ported box . I had a hard time struggling to get them in. I removed the back seats. There is a gray cardboard type thing behing the seats. That covers the rear speakers. move that up a little bit and theres a steel beam sorta thats stopping it from going into the trunk. I just used a pair of tin snips and cut it and bent it up. that worked for me .

 

[YelloEye]

Had my large ported box in my LT, had to remove the seat backs to fit it in thru the back part.

 

[Tuner923]

use hammer repeatedly, if not work use bigger hammer

 

[YelloEye]

We have the technology.

 

[Tuner923]

Go BIG or go home

 

[kawkinurjawl]

I ran 2x kicker l7's in a kicker ported box . I had a hard time struggling to get them in. I removed the back seats. There is a gray cardboard type thing behing the seats. That covers the rear speakers. move that up a little bit and theres a steel beam sorta thats stopping it from going into the trunk. I just used a pair of tin snips and cut it and bent it up. that worked for me .

that beam you cut is the strongest point in the car... i hope you welded it back because if you get in a wreck, its gonna be bad without that strong point.

---------- Post added at 09:56 AM ---------- Previous post was at 09:55 AM ----------

My whole install of amp and sub box took a total of 4 almost 5 hours from start to finish. takes time to get it right the first time.