HEAD LIGHTS

[jaamik]

I installed complete head light assemblies on both sides of my 2005 Cobalt. I have checked fuses and connections but still don't have low beams either side. I read someplace that in this case the relay that controls the head lights is in the fuse box base. Is this correct? Many thanks.....mike

 

[five7man]

 

[jaamik]

I installed complete head light assemblies on both sides of my 2005 Cobalt. I have checked fuses and connections but still don't have low beams either side. I read someplace that in this case the relay that controls the head lights is in the fuse box base. Is this correct? Many thanks.....mike

I installed complete head light assemblies on both sides of my 2005 Cobalt. I have checked fuses and connections but still don't have low beams either side. I read someplace that in this case the relay that controls the head lights is in the fuse box base. Is this correct? Many thanks.....mike

I installed complete head light assemblies on both sides of my 2005 Cobalt. I have checked fuses and connections but still don't have low beams either side. I read someplace that in this case the relay that controls the head lights is in the fuse box base. Is this correct? Many thanks.....mike

View attachment 3294

Thanks, five7man..............seems there is a relay under the hood tht controls both sides..........I'll check it out.........thanks, again........Mike

 

[pawntec]

I installed complete head light assemblies on both sides of my 2005 Cobalt. I have checked fuses and connections but still don't have low beams either side. I read someplace that in this case the relay that controls the head lights is in the fuse box base. Is this correct? Many thanks.....mike

Did you upgrade the headlights or just installed the factory housings and standard 9007 bulbs?

 

[jaamik]

I'll have to check it out. It's my grandsons care and he bought the parts. I don't know if the parts are aftermarket or OEM....thanks for the reply..........mike

 

[jaamik]

thanks for the schematic five7man............I need a "fuse block" that contains the low beam relay

 

[munron]

Sounds like both bulbs are burned out. Have you tried new ones?

 

[john intili]

I have recently experienced a no high beam condition, however in the DRL mode, i can flash to pass and they come on, so it appears that maybe the switch at the column is faulty. I need to check the relay and fuse for high beams. I did install higher wattage bulbs a few months ago.
BTW its a 2009 LS XFE