H.I.D help!!

[lebUNIT]

Hi guys, im tryin to install an HID kit on my cobalt and i just realized the battery is in the trunk! How is that guna happen? The wires arent long enough to go there!
Any help will be appreciated
Thanks guys

 

[wardzach2007]

What kind of kit do you have?

They should just be plug and play. They have a connector to connect to your old wires.

 

[Tom]

post pics of your kit, they should be plug and play

 

[lebUNIT]

i think i got it. Thanks for the input

 

[Hailcesar75]

Does anyone have the "staples" button? Cuz that was easy

 

[dman090]

i just wired mine into the positive pole in hte fuse box and grounded it to a screw underneth the headlight

 

[YelloEye]

i just wired mine into the positive pole in hte fuse box and grounded it to a screw underneth the headlight

Thats kinda how I ran mine, my ground was the little bolt next to the windshield washer fluid.

 

[dman090]

Thats kinda how I ran mine, my ground was the little bolt next to the windshield washer fluid.

i dont know if thats where mine is or not, all i know its grounded to a little screw that is right in your face when you take the black mounting thing off for the headlight

then i have my ballast mounted right above that lil bolt

 

[YelloEye]

i dont know if thats where mine is or not, all i know its grounded to a little screw that is right in your face when you take the black mounting thing off for the headlight

then i have my ballast mounted right above that lil bolt

The bolt mine was grounded on was directly visable and on the inside of the engine compartment (not out by the headlight)

My ballasts were mounted to the underside of the black plastic headlight mount. Worked very nice.

 

[dman090]

did you mount your ballast directly to the headlight mount? or under neath on the body of the car? i have mine underneath on the body