ff_drift_lol's COTM Submission

[ff_drift_lol]

so a lot of new stuff guys

i'm still not crazy low, but low enough to compliment the wheels. I am on ground force front springs and "trimmed" rear progress springs.

so the story is...hit a curb.

positive camber </3

replaced the cradle, struts, control arm, knuckle, hub and prepped my wheels.

the color is pearl white the same PN as the cadillac pearl white. it's a sexy color really.
put them on the car, got bored already.

satin pink

so now I'm up to this part. cool...but needs something drastic.

lolcamberz

still got my half finished roll cage and rci harness, wink mirror, knockoff grant wheel.

needs wheel spacers. i am planning on using 25mm rear, possibly 30, and 10mm front possibly 15.

future plans to widen the stock wheels to 9"

for the interior, gotta finish up the custom roll cage and line the whole car with bamboo flooring and zebra carpet. budget build at it's best lol. enjoy!

engine:
airbox mod
snow performance water-methanol injection 50/50 mix
gutted downpipe
custom 2.5" catback with apexi n1 tip and full boar chambered muffler
bcp 100 octane tune

drivetrain:
exedy stock replacement clutch
ottp rotated trans mounts stage 2
ottp axles stage 1
b&m short throw shifter

suspension:
ottp rack spacers
ground force front springs
progress rear springs
ss/tc struts
rear hub shims and modified caliper brackets for roughly 7 degrees of negative camber


brakes:
r1concepts premium cross drilled slotted rotors
hawk hps pads

wheels:
painted stockers with cooper zeon zpt 215/45 r18

interior:
stock recaros
6 point cage
rci 4 point harness
wink 5 panel mirror
autometer pro comp: oil press, water temp (intercooler temp), boost/vac
aem uego
aeroforce interceptor

 

[utsadude]

Little late. Sorry man. Can make this for next month if you would like.

 

[ff_drift_lol]

lol it's cool! yeah let's just do that. it'll be for june

 

[utsadude]

Sounds good. Done.