You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Search results
-
0
P0102 code MAF, help me please!!
update I went to meter out the maf, precisely as the above post says, I had metered it before, and it seemed ok, but I decided to do it again anyway. ground was good no resistance, pink(hot) wire was good lit up with a test light, but the yellow wire was acting up like bouncing all over the...- 07CobaltLS
- Post #9
- Forum: LS, LT, LTZ
-
0
P0102 code MAF, help me please!!
if you know the wiring diagram for the maf which is actually labeled on the maf A-E. I metered the maf and when I am on A+B I get 4.99v when I am on B+C I got like 15V, when I am on B+D it was like 6-7V and B+E was also 4.99v hopefully this will help someone help me ---------- Post added at...- 07CobaltLS
- Post #8
- Forum: LS, LT, LTZ
-
0
P0102 code MAF, help me please!!
chased out all of the wires to the maf all the way to the ground, to the fuse panel, which with maf unplugged and car running I have 15v roughly, and chased another all the way where it goes into the plug for the computer, the other two go into a plug on the fire wall, just plugs together, no...- 07CobaltLS
- Post #6
- Forum: LS, LT, LTZ
-
0
P0102 code MAF, help me please!!
I was working on chasing the wires before it got dark, some of the casing around the wires had began to fall apart allowing the heat from the motor to start to slightly melt the wires together a bit. the odd thing is that it does come and go, when it is acting up the tranny(auto) slams into gear...- 07CobaltLS
- Post #4
- Forum: LS, LT, LTZ
-
0
P0102 code MAF, help me please!!
ok the baro and map both seem ok according to my limited knowledge, but I cleared the code and a little while later the maf values started moving again but shortly after cel came back and it was stuck on 1.49 again whats with the number being the same twice in a row- 07CobaltLS
- Post #2
- Forum: LS, LT, LTZ
-
0
hey I got a thread on p0102 code any help would be great
hey I got a thread on p0102 code any help would be great- 07CobaltLS
- Profile post
-
0
P0102 code MAF, help me please!!
got 07 cobalt keeps giving me a P0102 code, I have changed maf sensor checked entire intake, changed air filter, changed purge solenoid, changed every fuse related to ecm, trans, and evap. bought a OBD II/EOBD CEN-TECH today, values for maf show up in g/s, which aint sure what that is. supposed...- 07CobaltLS
- Thread
- Replies: 11
- Forum: LS, LT, LTZ
-
0
ok first time user I have a issue with my 07 cobalt LS 2.2 keep getting code p0102 on my car. I...
ok first time user I have a issue with my 07 cobalt LS 2.2 keep getting code p0102 on my car. I have changed the maf sensor, checked the entire intake for blockages, changed the air filter, have put in new purge solenoid, replaced every fuse that was related to the ecm, evap and trans. I bought...- 07CobaltLS
- Profile post