Search results
-
What's the difference between a lt and rs suspension?
DONT BUY THE CHEAP EBAY SPRINGS!!! they are just shorter stock rate springs so you just slam along. I have the rub marks on my wheel wells to prove it from a few highway patch jobs. They suck horribly, and when they settle, alot of times they wont be the same drop at all 4 corners. Trust me...- jonny_b
- Post #19
- Forum: Suspension
-
custom paint on mon.
Well a pint was $36, so I'll be pulling out the gun for this job. I guess I could do the hood to get rid of the chips too. Lol. Maybe even the front bumper. Lol. I dont think a pint will cover that much though. -
custom paint on mon.
i know it wont be perfect, but i did try 2 different yellow rattle cans just so it wasn't grey anymore and it is way off. the autozones dont mix around here. and they have like 60 different duplicolor touch up cans, but of course no yellow. there is an autobody supply place close that i am going... -
custom paint on mon.
i haven't been able to make it to the auto paint place around here before they close to get the right color. the 3 shades of yellow i have found weren't close enough to leave on. this grey primered quarter is driving me crazy. so i think i am taking monday off to get it. -
g5 rear end swap?
haha. if i wasnt in PA maybe we could have a discussion. ---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ---------- are a g5 and sedans tail lights the same? i know the trunk isn't, but maybe the rest is able to be swapped. sedans are all over the junkyards around...- jonny_b
- Post #10
- Forum: LS, LT, LTZ
-
front door speaker problems
you could switch out the speaker wire to eliminate that, but since you have the '09 your chime comes through that speaker. i dont remember if this was already said now, but also since you have the '09 i think you need the expensive wiring harness also. if you use the cheap one you lose your...- jonny_b
- Post #15
- Forum: LS, LT, LTZ
-
custom paint on mon.
yeah. i can fix it, but it will be a long process where i may need to bring in a professional. i know a guy down the road. may be he can help me out once i get the colors. its been planned out, but i guess application is warranted now. fucking maico paint jobs. i knew something was up from... -
custom paint on mon.
Well I had a few spots of clear peeling up, soooooo wet sanding with 1600 grit did the trick, but the poor paint job that was done previously had to have had on coat of color, because i sanded through the clear, the color, the primer, and back too original yellow. Wtf. Well I'm fixed the quarter... -
-
Cobalt SS/G5 compatibility
How can you just swap the whole back end?! Tails trunk and bumper?! I know thats what I want!! -
g5 rear end swap?
What parts are needed to lose the 4 eyes, and get the g5 tails? Bumper, tailights, and trunk? I know the wiring may work with some re routing for the reverse, but am I missing anything. And g5 guys that are thinking of going to the cobalt coupe rear end get at me. We can work out a...- jonny_b
- Thread
- Replies: 10
- Forum: LS, LT, LTZ
-
coil pack cover
Yeah. Just looked and there a 3 torx screws. Were mine broke I could see the one. You scared me for a sec I didnt want to buy a whole new coil pack just for a cover. Lol- jonny_b
- Post #5
- Forum: LS, LT, LTZ
-
coil pack cover
cant seperate the top from the coil pack box? i thought there were some torx screws behind it to take that off.- jonny_b
- Post #3
- Forum: LS, LT, LTZ
-
coil pack cover
What year 2.2's had this cover, or even 2.4. I'm gonna make it custom so I guess it doesnt really matter. What would a reasonable price be?- jonny_b
- Thread
- Replies: 5
- Forum: LS, LT, LTZ
-
front door speaker problems
In-Dash Car Navigation Systems - Car Navigation Systems at OnlineCarStereo.com - Bluetooth | Yes - Preamp Voltage | 4 - Rear View Camera Input | Yes this was just a basic search, but you can remove the options and go from there. they have the best prices i had found on most things. but i dont...- jonny_b
- Post #13
- Forum: LS, LT, LTZ
-
vinyl ?'s
I searched a bit, and got the same answer. My brother in laws buddy does custom vinyl, so I have the word out. they live across the state, so I'll get an answer and be able to get some advice mon or tues. I just want a strip. I'll do the cut and apply myself.- jonny_b
- Post #3
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
Ok. That makes sense.......lol.- jonny_b
- Post #15
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
I wont take it personally. But how can me not wearing a seat belt endanger my passengers? Not an attack either, but if we are in a situation where I should have one on, we already hit something.....i take my passengers safety into account when they get in, and my aggressiveness behind the wheel...- jonny_b
- Post #13
- Forum: LS, LT, LTZ
-
vinyl ?'s
I want to buy a basic black vinyl strip. Like 30'×6". Its almost double what I need, but like I he leeway of being able to mess up once and not be all stressed about perfection. What mil is good for outside applications, and is there different grades of adhesion? And in all honesty, if I could...- jonny_b
- Thread
- Replies: 2
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
Yep. I rarely use my seatbelt, I know its not the smartest. I will yell at my son about his, while I dont wear mine. But hey. If I can ride a motorcycle with no helmet, then wtf do j meed a seat belt for? But I will be doing the passenger seat for sure, and waiting for the headliner redo for the...- jonny_b
- Post #11
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
Yep. And since I bought some good hex head replacements, when I need to drop the headliner, it will be easy to get off. Hopefully that is soon. It will look odd until I get that done.- jonny_b
- Post #9
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
Lol. If I didnt borrow it I would. It is a snap on. I wonder if they would still replace it? Lol ---------- Post added at 01:13 PM ---------- Previous post was at 12:17 PM ---------- Its out!! Heated it up with a little torch, and vice gripped it. Panels ok, but the bracket cover was a...- jonny_b
- Post #7
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
I'm gonna try to heat it up and use some vise grips, then do the cutting small enough I can slide the bracket off so there is more surface area to grip today. If all else fails, the welder and nut gets pulled out.- jonny_b
- Post #5
- Forum: LS, LT, LTZ
-
front door speaker problems
i would recommend getting a touch screen with nav. they are so nice. mine doesn't have the nav, but it still looks so much better than a single with a cubby hole.- jonny_b
- Post #9
- Forum: LS, LT, LTZ
-
stripped seatbelt bolt recommendations?
I thought of that, I was hoping no to be welding inside of the car. That is going to force me to take all the seats out, and headliner. Damn. I guess I should start shopping for the fabric now.- jonny_b
- Post #3
- Forum: LS, LT, LTZ